Schuh’s Services® We Clean It Up®
Sporicidin Disinfectant Solution help prevent future mold growth by applying Sporicidin or Microban Disinfectant Spray to vulnerable surfaces..
Sporicidin Disinfectant Solution is Bactericidal, Virucidal, Fungicidal, Turberculocidal.
Sporicidin Disinfectant Solution kills Mold & Mildew - even Swine Flu.
Sporicidin Disinfectant Solution kills H1N1 Swine Flu Virus in 3 Minutes!
Sporicidin Disinfectant Solution kills Coronavirus (SARS) in 10 Minutes!
Sporicidin Disinfectant Solution kills Parvovirus!
One-step cleaning, deodorizing and disinfection.
EPA/FDA/OSHA Compliant. 2,3,4
"Sporicidin Disinfectant Solution is effective against Stachybotrys, Chaetomium and Aspergillus." 1,2
"Sporicidin Disinfectant provides continuous, residual bacteriostatic activity for up to 6 months." 2
Sporicidin is EPA-registered to clean air ducts. 2
1 Department of Cell Biology and Molecular Genetics, University of Maryland
2 EPA Registration (8383-3)
3 FDA Registration (K926013)
4 OSHA Bloodborne Pathogens Standard (29 CFR 1910.1030)
Used in hospitals and pharmaceutical clean rooms since 1978, Sporicidin kills 100% of vegetative pathogenic organisms for contamination and odor control.
Sporicidin Disinfectant Solution is EPA-registered to clean, disinfect and deodorize. Sporicidin is non-corrosive to surfaces including plastics, latex, vinyl, glass, wood, metal and porcelain. It provides continuous residual antimicrobial activity for up to 6 months.
Sporicidin Disinfectant Solution is registered for mold and mildew remediation/restoration for use in institutional, commercial and home environments.
Sporicidin Disinfectant Solution has been used in hospital, medical and dental environments since 1978 and provides 100% kill of disease and odor-causing organisms.
Sporicidin Disinfectant Solution is FDA, EPA and OSHA compliant. Recommended for use in homes, offices, hospitals, medical, dental and veterinary clinics, pet areas, pharmaceutical and industrial clean rooms, laboratories, nursing homes, schools, hotels, dormitories, buses, trains, airplanes, trucks, automobiles, morgues, lockers, athletic facilities, beauty and tanning salons, massage facilities and public toilets.
Sporicidin Disinfectant Solution is a broad-spectrum disinfectant that provides 100% kill of disease and odor-causing organisms on hard, non-porous surfaces. Cleans, disinfects and deodorizes and prevents mold and mildew growth. Recommended for use on floors, walls and ceilings in areas damaged by water, smoke and sewage. Sporicidin® is fungicidal and effective against Stachybotrys chartarum (black mold), Chaetomium globosum and Aspergillus niger.
Sporicidin Disinfectant Solution is approved for cleaning air ducts and decontaminating carpets.
Sporicidin Disinfectant Solution can be used to clean and disinfect biohazards at trauma and crime scenes where blood and bodily fluids are found. Bloodborne Pathogens Standards (29 CFR 1910.1030).
Sporicidin Disinfectant Solution is EPA registered to provide up to six months of continuous residual bacteriostatic activity after it is applied to surfaces.
Sporicidin Disinfectant Solution has an EPA toxicity rating of "Low/Very Low".
Sporicidin Disinfectant Solution is proven effective against disease and odor-causing organisms including:
Aspergillus niger (mold)
Avian Influenza A, H9N2 (bird flu)
Canine Parvo virus
HIV-1 (Aids Virus)
Influenza "A" (H1 N1) (Swine Flu)
MRSA (Methicillin-resistant Staphylococcus aureus)
Polio type 1
Trichophyton mentagrophytes (Athlete's foot)
Recommended Uses for Sporicidin Disinfectant Solution:
Sewer backflow cleanup.
Trauma & crime scene cleanup.
Air duct cleaning - does not require rinsing after application. However, you should refere to the EPA article on duct cleaning at epa.gov/iaq/pubs/airduct.html Should chemical biocides be applied to the inside of air ducts.
For expert advise on your duct cleaning services and need : wecleanheatducts.com
Carpet cleaning, decontaminating and odor control.
Misting and dust suppression.
Water and flood damage restoration.
Disinfections of hard, non-porous environmental surfaces.
Cleaning, disinfecting and deodorizing of equipment and personal protective equipment.
Features and Benefits of Sporicidin Disinfectant Solution:
Continuous residual bacteriostatic activity up to 6 months.
Kills mold and mildew, including Stachybotrys chartarum (black mold).
Kills Mold & Mildew - even Swine Flu.
Provides 100% kill of disease and odor causing organisms.
Sporicidin® Kills Coronavirus (SARS) in 10 Minutes.
Kills H1N1 Swine Flu Virus in 3 Minutes!
EPA, FDA and OSHA compliant 2,3,4.
EPA toxicity rating "low/very low".
Cleans, disinfects and deodorizes in one step.
Fungicidal, bactericidal, virucidal, mildewcidal and tuburculocidal.
Non-corrosive to surfaces including plastics, latex, vinyl, glass, wood, metal and porcelain.
Alcohol free safe for equipment.
Contains a pharmaceutical active ingredient system with no harsh chemicals, such as bleach.
Will not inhibit the adhesion of paint.
Mildly alkaline (pH 7.5).
Non-staining and non-flammable.
No special shipping or disposal restrictions.
Registered in all 50 states (including California), Puerto Rico and Canada.
Sporicidin Disinfectant Solution Directions:
Surfaces and objects should be pre-cleaned to remove debris. Pre-cleaning can be accomplished by first cleaning with Sporicidin Disinfectant Solution. Then apply Sporicidin® Disinfectant Solution and allow toremain for 10 minutes for 100% kill of vegetative organisms. Sporicidin can be applied by sponge, mop, cloth, pressure sprayer, fogging device, portable sprayer, portable or truckmounted carpet cleaning machine. It is a violation of U.S. Federal Law to use this product in a manner inconsistent with its labeling. Do not dilute prior to use. Do not mix with any other chemicals.
Mold Remediation/IAQ: Sporicidin Disinfectant Solution is an EPA registered fungicide that cleans, disinfects and deodorizes. It provides continuous residual bacteriostatic activity for 6 months after application.
Clean, Disinfect and Deodorize: Pre-clean contaminated area with Sporicidin Disinfectant Solution to remove excess vegetative growth, filth or contaminates. Thoroughly wet pre-cleaned area with Sporicidin® Disinfectant Solution and allow surfaces to remain wet for ten minutes. Sporicidin can be applied by hand sprayer, sponge, mop, cloth, pressure sprayer, fogging device, portable sprayer, portable or truckmounted carpet cleaning machine.
Dust and Spore Suppression Applications: Use Sporicidin Disinfectant Solution to effectively knock down and suppress airborne dust particles and spores within containment areas prior to final clearance inspection and testing during mold mitigation. Mist Sporicidin Disinfectant Solution into the air within the containment area using a trigger sprayer, pressure sprayer or fogging device in accordance with device manufacturer instructions. Refer to applicable fogging or misting guideline section below for more information. Allow mist or vapor to settle onto surfaces and remain wet for ten minutes. Thoroughly clean and wipe all hard, non-porous surfaces with Sporicidin Disinfectant Solution using clean cloth, sponge or mop. Allow surfaces to air dry.
Fogging: Sporicidin Disinfectant Solution is recommended for fogging surfaces and articles in sealed rooms adjunct to manual cleaning and disinfecting. Vacate the area to be fogged. Seal windows, doors, air intakes and ducts. Fill fogging device with Sporicidin and set timer for treatment cycle as recommended by manufacturer. Turn on the device, leave the room area and seal the door. Enter the area after it has been properly ventilated.
Misting Applications: Misting treatments may be applied using a pressure sprayer, trigger sprayer or an electric fogging device and Sporicidin® Disinfectant Solution. Seal all doors, windows and intake ducts or vents. Vacate the area to be treated. Personnel remaining in the contained area should wear personal protective equipment (PPE) during the misting application in accordance with OSHA Respiratory Protection Standards (see Respiratory Protection notice below). Fill misting device with Sporicidin Disinfectant Solution and adjust device output to desired settings. Mist disinfectant into air and onto articles and/or surfaces allow remaining wet for 10 minutes. Vacate room and reseal door. Treated area should remain sealed for 15 to 30 minutes after the misting application is complete. Ventilate treated area prior to commencing normal cleaning procedures. Follow regular Sporicidin cleaning and disinfecting procedures upon returning to the treated area.
Water/Flood Damage: Remove excess floodwater and foreign matter. Pre-clean contaminated surfaces with Sporicidin® Disinfectant Solution using mop, cloth, sponge or pressure sprayer. Wipe dry. After final cleaning, reapply Sporicidin Disinfectant Solution to affected areas and allow to remain for 10 minutes. Sporicidin® Disinfectant Solution provides 100% kill of disease and odor-causing organisms and provides up to 6 months continuous, residual bacteriostatic protection when applied to pre-cleaned hard, non-porous surfaces.
We Clean It Up ® is a registered service mark & trade mark of Schuh’s Services ® Copyright 2012
Clare Mi, Harrison Mi. Gladwin Mi, Evart Mi, Beaverton Mi ,Houghton Lake Mi, Prudenville Mi, Sugar Springs Mi, Rosebush Mi, Mt Pleasant Mi and surronding areas.